Disc flat air mill manufacturers often encounter some dust leakage in the process of using air mill, which is inevitable. As we all know, long-term inhalation of dust by human body may cause harm to human body, so it is necessary to avoid excessive inhalation of a large amount of dust during operation. Nowadays, air mill is widely used in various powder industries. Its excellent performance determines that it is a valuable equipment. At present, it is impossible to eliminate it. Therefore, the manufacturers of disc flat air mill must take countermeasures
In the process of crushing with air mill, the manufacturer of disc flat air mill can take the following measures to reduce the harm of dust to human body:
(1) As the dust will leak slightly during the manufacturing process, the dust will be emitted, resulting in pollution to the work area. Therefore, it is necessary to ensure the tightness of the air mill joint
(2) Increase the humidity in the operation area of the airflow crusher, strengthen ventilation, and reserve fire extinguishing equipment
(3) The manufacturer of disc type flat air mill shall provide protective equipment for the operators of the air mill according to the regulations, and the operators shall wear protective equipment correctly according to the regulations.
(4) Maintain and manage the existing dust-proof equipment! Ensure its normal operation and dust prevention
The airflow crusher is used to crush materials, so the crushed materials and tailings must be discharged in time. When the crusher discharges these crushed materials, there will be dust. So how can the manufacturer of disc flat air mill solve the problem of too much dust?
1. Installation of dust remover: generally, this type of dust remover can be used with crusher. Collect the dust in the capture bag, and then filter the dust from the dust collector through the cloth bag to discharge it;
2. Cloth bag dust prevention: the cloth bag is closely tied with the powder outlet of the machine to prevent air and powder leakage. During operation, pay attention to blocking the powder outlet during shutdown, and clean up the dust in time.
3. Wood shower or pool dust removal: mainly use the fan to pump the dust to the outside of the crushing room, and then use the spray dust collection or pool dust collection.