Airflow crusher has been widely used in some industries. What should we pay attention to in the process of use? Let's follow the price of air mill and make it up. Let's have a simple understanding!
1. During the production process, the temperature rise of the bearing must be checked frequently. When the temperature rises above 50 ℃, the machine shall be shut down and checked to find out the cause and eliminate the fault
2. When the new air mill is running, the drive belt is easy to stretch. Pay attention to adjusting the proper tightness of the belt to ensure the service life of the belt.
3. Vulnerable parts shall be inspected frequently and replaced in time to ensure production quality and output.
4. Always check the blades and bushings of the air mill for wear. If worn, the yield will be reduced and the particle size will become coarser. Replace if worn
5. Lubricate and lubricate the main engine and step moving bearings with special grease No. 2 from 2 to 265-295 degrees
6. The grease replacement cycle of the air mill bearing is 2000 hours, and the filling amount of smooth grease is 1 / 2 (upper dimension) or 3 / 4 (lower dimension) of the space in the bearing cavity. Do not fill too much smooth grease, otherwise the bearing temperature will be too high
7. The grease replacement cycle of the screw feeder of the laboratory air mill is 4000 hours, and ordinary calcium based light lubricating grease is added.