The main contents of the safe operation rules of the ultra-fine air mill are as follows:
(1) All circuits and electrical components of the ultra micro air mill should be checked to see if they can work properly
(2) Has the machine been grounded to avoid the risk of electric shock due to electrification of the casing
(3) Whether the spindle is stuck, if any, please deal with it in time
(4) Check whether there is any abnormality during the operation of the machine. If so, stop and check immediately
(5) Check whether the blade is fastened and whether the blade clearance meets the specified standards
(6) Before use, check whether there are sundries in the studio and remove them in time
(7) The feeding can only be started after the ultra micro air mill operates normally.
(8) Stop feeding before shutdown. Wait until the machine is completely discharged before stopping.
(9) The feeding shall be uniform and not excessive, so as not to increase the burden of the machine.
(10) During the operation of the ultra-fine air mill, cleaning, maintenance and other work cannot be carried out.